联阳芯片型号汇总
本文整理联阳 Video Link、USB3 视频桥接、USB Type-C 与 SoC 芯片型号，按产品类别列出功能描述，供选型检索。
Video Link
HD
| 型号 | 功能描述 |
|---|---|
| IT6602E | Dual-port HD 1.4 Receiver with 3D Support The IT6602E is a dual-port HD receiver, which is fully compatible with HD 1.4b, HD 1.4b 3D and HDCP 1.4, and also backward compatible with DVI 1.0 specifications. |
| IT66021FN | Single-port HD 1.4 Receiver with 3D Support The IT66021FN is a single-port HD receiver, which is fully compatible with HD 1.4b, HD 1.4b 3D and HDCP 1.4, and also backward compatible with DVI 1.0 specifications. |
| IT6801FN | Single Port HD 1.4 Receiver with 3D Support The IT6801FN is a single-port HD receiver. It is fully compatible with HD 1.4a, HD 1.4a 3D and HDCP 1.4 and also backward compatible with DVI 1.0 specifications. The IT6801FN with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content. The IT6801FN also supports all the primary 3D formats which are compliant with the HD 1.4a 3D specification. |
| IT68013FN | Single-port HD 1.4 Receiver with 3D Support The IT68013FN is a single-port HD receiver, which is fully compatible with HD 1.4b, HD 1.4b 3D and HDCP 1.4 and also backward compatible with DVI 1.0 specifications. The IT68013FN with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content. |
| IT6802E | Dual Port HD 1.4 Receiver with 3D Support The IT6802E is a dual-port HD receiver. It is fully compatible with HD 1.4a, HD 1.4a 3D and HDCP 1.4 and also backward compatible with DVI 1.0 specifications. The IT6802E with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content, along with state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD in digital televisions and projectors. The IT6802E also supports all the primary 3D formats which are compliant with the HD 1.4a 3D specification. |
| IT6807 | Dual port HD 1.4 Receiver with 3D Support The IT6807 is a dual-port HD 2.0b receiver which supports 6.0 Gbps/channel capability and up to 18 Gb/s bandwidth for each port. The port-0 can also operate in HD 2.0b mode, and it is fully compatible with HD 1.4b/HD 2.0b, HDCP 1.4/HDCP2.2 and also backward compatible with DVI 1.0 specifications. The IT6807 with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content, along with state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD in digital televisions and projectors. The IT6807 also supports all the primary 3D formats which are compliant with the HD 2.0 3D specification. |
| IT68071 | Single-port MHL 2.2/HD 2.0b Receiver with 3D Support to 8-Lane V-by-One® HS The IT68071 is a single-port HD 2.0b receiver that supports 6.0 Gbps/channel capability and up to 18 Gbps bandwidth. This HD input port can also operate in both HD 2.0b and MHL 2.2 dual mode, and it is fully compatible with MHL 2.2, HD 1.4b/HD 2.0b, HDCP 1.4/HDCP 2.3 and is also backward compatible with the DVI 1.0 specifications. |
| IT6653 | Single Chip HD 2.0 to 4 Lane DisplayPort 1.2 Converter with Embedded MCU The IT6653 is a high-performance single-chip HD to DisplayPort converter. Combined with HD receiver and DisplayPort transmitter, the IT6653 supports HD input and DisplayPort output by conversion function. |
| IT68050 | Single-port HD 2.0b Receiver with 3D Support The IT68050 is a single-port HD 2.0b receiver which supports 6.0 Gbps/channel capability and up to 18 Gbs bandwidth. It is fully compatible with HD 1.4b/HD 2.0b, HDCP 1.4/HDCP 2.3 and also backward compatible with DVI 1.0 specifications. |
| IT68051 | Dual port HD 2.0b Receiver with 3D Support The IT68051 is a dual-port HD 2.0b receiver which supports 6.0 Gbps/channel capability and up to 18 Gb/s bandwidth for each port. It is fully compatible with HD 1.4b/HD 2.0b, HDCP 1.4/HDCP 2.2 and also backward compatible with DVI 1.0 specifications. The IT68051 with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content, along with state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD in digital televisions and projectors. The IT68051 also supports all the primary 3D formats which are compliant with the HD 2.0 3D specification. |
| IT68052 | Dual port HD 2.0b Receiver with 3D Support The IT68052 is a dual-port HD 2.0b receiver which supports 6.0 Gbps/channel capability and up to 18 Gb/s bandwidth for each port. The IT68052 with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content, along with state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD in digital televisions and projectors. The IT68052 also supports all the primary 3D formats which are compliant with the HD 2.0 3D specification. |
| IT66120FN | Low Power Transmitter with HD 1.4 3D The IT66120 is a high-performance and low-power single channel HD transmitter, fully compliant with HD 1.3a, HDCP 1.2 and backward compatible to DVI 1.0 specifications. IT66120 also provide the HD 1.4 3D feature, which enables direct 3D displays through an HD link. The IT66120 serves to provide the most cost-effective HD solution for DTV-ready consumer electronics such as set-top boxes, DVD players and A/V receivers, as well as DTV-enriched PC products such as notebooks and desktops, without compromising the performance. Its backward compatibility to DVI standard allows connectivity to myriad video displays such as LCD and CRT monitors, in addition to the ever-so-flourishing Flat Panel TVs. |
| IT66122 | Low Power HD 1.4 4K2Kp30 Transmitter The IT66122 is a high-performance and low-power single channel HD transmitter, fully compliant with HD 1.3a, HDCP 1.2 and backward compatible with DVI 1.0 specifications. |
| IT66122FN-300 | Low Power Transmitter with HD 1.4 3D The IT66122-300 is a high-performance and low-power single-channel HD transmitter, fully compliant with HD 1.3a, HDCP 1.2 and backward compatible with DVI 1.0 specifications. |
| IT6615 | HD 2.0 4K2Kp60 Transmitter The IT6615 is a high-performance HD 2.0 transmitter, fully compliant with HD 1.4b/2.0b, HDCP 1.4/2.2 and backward compatible to DVI 1.0 specifications. The IT6615 supports 36-bit (12-bit/color) high-quality uncompressed video content, along with the state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD. |
| IT6263 | Single Chip De-SSC LVDS to HD Converter The IT6263 is a high-performance single-chip De-SSC LVDS to HD converter. Combined with LVDS receiver and HD 1.4a Transmitter, the IT6263 supports LVDS input and HD 1.4 output by conversion function. The build-in LVDS receiver can support single-link and dual-link LVDS inputs, and the build-in HD transmitter is fully compliant with HD 1.4a/3D, HDCP 1.2 and backward compatible with DVI 1.0 specification. With high speed LVDS RX, the IT6263 can support resolution up to 1080P and UXGA and 10-bit deep colors. The IT6263 also supports all the HD 1.4a 3D mandatory formats which are compliant with HD 1.4a 3D Specification |
| IT62633 | Single Chip High Speed LVDS to HD 2.0 Converter The IT62633 is a high-performance single-chip De-SSC LVDS to HD converter, combining a high-speed LVDS receiver and an HD 2.0b transmitter. The IT62633 supports LVDS input and HD 2.0b output by conversion function. |
| IT6264 | Single Chip High Speed LVDS to HD 2.0 Converter The IT6264 is a high-performance single-chip De-SSC LVDS to HD converter, Combined with the high speed LVDS receiver and HD 2.0b transmitter. The IT6264 supports LVDS input and HD 2.0b output by conversion function. The build-in high speed LVDS receiver can support 1/2/4 link and color depth up to 10bit .In order to reduce the EMI noise on legacy system application, the traditional LVDS source will transmit differential signals with spread spectrum, but this spread spectrum does not be allowed for HD protocol. The IT6264 also build-in unique De-SSC ( De-Spread Spectrum ) function , it can help customers easily to adopt the IT6264 on the EMI-concerned platform, with SSC has been generated from LVDS source processors. |
| IT6265 | 8 Lane V-by-One® HS to HD 2.0 Converter The IT6265 is a high-performance 8-lane V-by-One® HS to HD 2.0 converter, fully compliant with V-by-One® HS 1.4, HD 1.4b/2.0b, HDCP 1.4/2.2 and backward compatible to DVI 1.0 specifications. The IT6265 supports 36-bit (12-bit/color) high-quality uncompressed video content, along with the state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD. |
| IT6635 | 4 IN to 1 OUT HD 2.0 18 Gb/s Retimer Switch The IT6635 is a HD 2.0 4 IN to 1 OUT re-timer switch which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT6635 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. With the re-timer structure, the IT6635 can support superior performance for long cable application. |
| IT66352 | 2 IN to 1 OUT HD 2.0 18 Gb/s Retimer Switch The IT66352 is a HD 2.0 2 IN to 1 OUT re-timer switch which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT66352 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. With the re-timer structure, the IT66352 can support superior performance for long cable application. |
| IT66353 | 3 IN to 1 OUT HD 2.0 18 Gb/s Retimer Switch The IT66353 is an HD 2.0 3 IN to 1 OUT re-timer switch which supports maximum signaling rate of up to 6 Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6 Gbps/channel capability, the IT66353 can support ultra-high resolution content streams, such as 4K x 2K @ 50/60 Hz video formats. With the re-timer structure, the IT66353 can support superior performance for long cable application. |
| IT6636 | 3 IN to 1 OUT HD 2.1v Retimer Switch with Embedded MCU IT6636 is a 3-in, 1-out HD retiming switch that supports a signaling rate of up to 12 Gbps per channel. It is compliant with the latest HD 2.1a specification and backward compatible with HD 1.4x/2.0x specification. |
| IT66362 | 2 IN 1 OUT HD 2.1 (48 Gbps) Retimer Switch with Embedded MCU IT66362 is a 2-in, 1-out HD retiming switch that supports a signaling rate of up to 12 Gbps per channel. It is compliant with the latest HD 2.1a specification and backward compatible with HD 1.4x/2.0x specification. |
| IT66612 | 1-to-2 HD Active Splitter with EDID RAM and Embedded MCU The IT66612 is a one-to-two HD active splitter that supports a signaling rate of up to 3.0 Gbps. It is compatible with the latest HD 1.4b. With 3.0 Gbps capability, the IT66612 can support content stream such as the new 4K x 2K format, 1080P@120 Hz, 3D video with 1080P/3D@60 Hz in HD. Via IT66612, the ultra-high definition video content can be split to all its outputs. |
| IT6664 | 1 IN to 4 OUT HD 2.0 Dual in Active Splitter with EDID RAM The IT6664 is a one-to-four HD active splitter that supports a signaling rate up to 6.0 Gbps per channel. It is compatible with the latest HD 2.0, and HDCP 2.2 specifications. The 6.0 Gbps bandwidth capability of IT6664 allows it to support content stream such as the popular ultra-high definition 4K x 2K 60 Hz format, 3D video with 4K x 2K@30 Hz, and so on. SCDC data structure is contained in both TX and RX side of IT6664 so that HD 2.0 content could be properly received and transmitted to downstream side. |
| IT66620 | 1-to-4 HD Active Splitter with EDID RAM The IT66620 is a one-to-four HD in, HD out active splitter that supports a signaling rate up to 3.0 Gbps. It is compatible with the latest HD 1.4. With 3.0 Gbps capability, the IT66620 can support content stream such as the new 4Kx2K format, 1080P@120Hz, 3D video with 1080P/3D@60Hz in HD. |
| IT66630 | 1 IN to 2 OUT HD 2.0 Active Splitter with EDID RAM The IT66630 is a one-to-two HD 2.0 active splitter that supports a signaling rate of up to 6.0 Gbps per channel. It is compatible with the latest HD 2.0, and HDCP 2.3 specifications. |
| IT66631 | HD 2.0 to HD 2.0/TTL Dual Output Converter The IT66631 is a one-to-two, HD 2.0 to HD 2.0/TTL converter that supports a signaling rate of up to 6.0 Gbps per channel on the HD interface. It is compatible with the latest HD 2.0 and HDCP 2.3 specifications. |
| IT6634 | 4 IN to 3 OUT HD 2.0 Matrix/Switch The IT6634 is a HD 2.0 4 IN to 3 OUT matrix/switch which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT6634 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. |
| IT6620BFN | ARC/eARC Receiver with Audio MUX The IT6620BFN is a receiver designed for HD 2.1 Enhanced Audio Return Channel (eARC) and it is also backward compatible to the HD 1.4 Audio Return Channel (ARC). When operating in eARC mode, the Differential Mode Audio Channel (DMAC) bandwidth, i.e. 98.304Mbps, allows HD Sink to transmit 8-channel 192K audio to the HD Source. No video stream and CEC function is required when eARC link is active. |
| IT6621 | ARC/eARC Transmitter with Audio MUX The IT6621 is a transmitter designed for HD 2.1 Enhanced Audio Return Channel (eARC) and it is also backward compatible to the HD 1.4 Audio Return Channel (ARC). When operating in eARC mode, the Differential Mode Audio Channel (DMAC) bandwidth, i.e. 98.304Mbps, allows HD Sink to transmit 8-channel 192K audio to the HD Source. No video stream and CEC function is required when eARC link is active. |
| IT6622 | HD 1.4 Tx with eARC RX and Embedded MCU The IT6622 is a HD 1.4 Tx with eARC receiver function which supports maximum signaling rate up to 3Gbps/channel. It is compliant to the latest HD 1.4b specification and backward compatible to the DVI specifications. With 3Gbps/channel capability, the IT6622 can support ultra-high resolution content streams, such as 4Kx2K@30Hz video formats. |
| IT66341 | 4 IN to 1 OUT HD 2.0 Switch The IT66341 is a HD 2.0 4 IN to 1 OUT switch which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT66341 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. |
| IT66320 | 1 IN to 1 OUT HD 2.0 Retimer with HD 2.1 eARC RX and Embedded MCU The IT66320 is an HD 2.0 1 IN to 1 OUT Re-timer with eARC receiver function which supports maximum signaling rate of up to 6 Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6 Gbps/channel capability, the IT66320 can support ultra-high resolution content streams, such as 4K x 2K @ 50/60 Hz video formats. |
| IT66321 | 2 IN to 1 OUT HD 2.0 18 Gb/s Switch with Audio In/Out The IT66321 is a HD 2.0 2 IN to 1 OUT switch which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT66321 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. |
| IT66322 | 2 IN to 1 OUT HD 2.0 18 Gb/s Switch with eARC RX with Audio In/Out The IT66322 is a HD 2.0 2 IN to 1 OUT switch with eARC receiver function which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT66322 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. |
| IT66323 | 2 IN to 1 OUT HD 2.0 18 Gb/s Switch with ARC RX with Audio In/Out The IT66323 is a HD 2.0 2 IN to 1 OUT switch with ARC receiver function which supports maximum signaling rate up to 6Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6Gbps/channel capability, the IT66323 can support ultra-high resolution content streams, such as 4Kx2K@50/60Hz video formats. |
| IT66324 | 3 IN to 1 OUT HD 2.0 Switch with HD 2.1 eARC RX and Embedded MCU The IT66324 is an HD 2.0 3 IN to 1 OUT switch with eARC receiver function which supports maximum signaling rate up to 6 Gbps/channel. It is compliant to the latest HD 2.0b specification and backward compatible to the HD 1.4 and DVI specifications. With 6 Gbps/channel capability, the IT66324 can support ultra-high resolution content streams, such as 4K x 2K @ 50/60 Hz video formats. |
| IT66325 | 1 IN to 1 OUT HD 2.1 Retimer with eARC RX and Embedded MCU The IT66325 is an HD 2.1 1 IN to 1 OUT Re-timer with eARC receiver function which supports maximum signaling rate of up to 12 Gbps/channel. It is compliant with the latest HD 2.1a specification and backward compatible with the HD 2.0 and HD 1.4 specifications. |
| IT66326 | 2 IN to 1 OUT HD 2.1 Switch with eARC RX and Embedded MCU The IT66326 is an HD 2.1 2 IN to 1 OUT switch with eARC receiver function which supports maximum signaling rate of up to 12 Gbps/channel. It is compliant with the latest HD 2.1a specification and backward compatible with the HD 2.0 and HD 1.4 specifications. |
| IT66311 | HD 2.0 Retimer IT66311 is a single-in, single-out HD 2.0 retiming buffer that supports a signaling rate of up to 6.0Gbps. It is compliant to the latest HD 2.0a specification and backward compatible to HD 1.4 specification. With 6.0Gbps capability, IT66311 can support ultra-high resolution content stream, such as 4Kx2K @ 60Hz format. At extremely high data rate like this, signal quality drops significantly with extended board trace or cable length, making an additional retiming buffer necessary in many systems. |
| IT66313 | HD 2.1 Retimer IT66313 is a single-in, single-out HD retiming buffer that supports a signaling rate of up to 12Gbps per channel. It is compliant with the latest HD 2.1b specification and backward compatible with HD 1.4b/2.0b specification. |
| IT66318 | HD 2.0 Retimer IT66318 is a single in, single out HDM I 2.0 retiming buffer that supports a signaling rate of up to 6.0 Gbps. It is compliant to the latest HD 2.0a specification and backward compatible to HD 1.4 specification. With 6.0 Gbps capability, IT66318 can support ultra-high resolution content stream, such as 4K x 2K @ 60Hz format. At extremely high data rate like this, signal quality drops significantly with extended board trace or cable length, making an additional retiming buffer necessary in many systems. |
| IT66319 | HD 2.1 Retimer IT66319 is a single-in, single-out HD retiming buffer that supports a signaling rate of up to 12 Gbps per channel. It is compliant with the latest HD 2.1a specification and backward compatible with HD 1.4x/2.0x specification. |
| IT6695 | Single Chip HD to VGA Converter with Embedded MCU The IT6695FN is a high-performance single-chip HD to VGA converter. Combined with HD 1.4b receiver and triple DACs, the IT6695FN supports HD input and VGA output by conversion function. The build-in HD receiver is fully compliant with and HD 1.4b specification. With HD 1.4b receiver, the IT6695FN can support resolutions up to Full HD ( 1080P ), WUXGA and UXGA. Also the build-in triple DACs can support up to 10 bit deep colors. |
DisplayPort
| 型号 | 功能描述 |
|---|---|
| IT6563 | Single Chip 4 Lane DisplayPort 1.2 to HD 2.0 Converter with Embedded MCU The IT6563FN is a high-performance single-chip DisplayPort to HD converter. Combined with DisplayPort receiver and HD transmitter, the IT6563FN support DisplayPort input and HD output by conversion function. |
| IT6564 | Single Chip 4 Lane DisplayPort 1.2 to HD 2.0/VGA Converter with Embedded MCU The IT6564FN is a high-performance single-chip DisplayPort to HD and VGA converter. Combined with DisplayPort receiver, HD transmitter and triple DACs, the IT6564FN support DisplayPort input and HD/VGA output by conversion function. |
| IT6565 | Single Chip 2 Lane DisplayPort 1.4 to HD 2.0 Converter with Embedded MCU The IT6565FN is a high-performance single-chip DisplayPort to HD converter. Combined with DisplayPort receiver and HD transmitter, the IT6565FN support DisplayPort input and HD output by conversion function. |
| IT6566 | Single Chip 2 Lane DisplayPort 1.4 to HD 2.0/VGA Converter with Embedded MCU The IT6566FN is a high-performance single-chip DisplayPort to HD and VGA converter. Combined with DisplayPort receiver, HD transmitter and triple DACs, the IT6566FN support DisplayPort input and HD/VGA output by conversion function. |
| IT6569 | Single Chip 4 Lane DisplayPort 1.4 to HD 2.1 Converter with Embedded MCU The IT6569FN is a high-performance single-chip DisplayPort to HD converter. Combined with DisplayPort receiver and HD transmitter, the IT6569FN supports DisplayPort input and HD output by conversion function. |
| IT6516BFN | Single Chip DisplayPort to VGA Converter with Embedded MCU The IT6516BFN is a high-performance single-chip DisplayPort to VGA converter. Combined with DisplayPort receiver and triple DACs, the IT6516BFN supports DisplayPort input and VGA output by conversion function. The build-in DisplayPort receiver is fully compliant with DisplayPort 1.1a specification. With 2-lane HBR (High-Bit-Rate) DisplayPort receiver, the IT6516BFN can support VESA resolution up to WUXGA and UXGA. Also the build-in triple DACs can support up to 8 bit deep colors. |
| IT6517BFN | Single Chip DisplayPort to VGA Converter with Embedded MCU The IT6517BFN is a high-performance single-chip DisplayPort to VGA converter. Combined with DisplayPort receiver and triple DACs, the IT6517BFN supports DisplayPort input and VGA output by conversion function. |
| IT6505E | DisplayPort 1.1a Transmitter (The World’s First DP CTS 1.1 Source Device Certified) The IT6505 is a high-performance DisplayPort 1.1a transmitter, fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. The IT6505 supports color depth of up to 36 bits (12 bits/color) and ensures robust transmission of high-quality uncompressed video content, along with uncompressed and compressed digital audio content. |
| IT6507 | Single Chip DisplayPort 1.2 Transmitter The IT6507 is a high-performance DisplayPort 1.2a transmitter, fully compliant with DisplayPort 1.2a, HDCP 1.3 /2.3 specifications. The IT6507 supports color depth of up to 36 bits (12 bits/color) and ensures robust transmission of high-quality uncompressed video and audio content. |
| IT6508 | 4 Lanes DisplayPort 1.2 to Dual Bus TTL Converter The IT6508 is a high-performance single-chip DisplayPort to TTL output converter.The build-in DisplayPort receiver is fully compatible with DisplayPort 1.2a and HDCP 1.3/2.3 specifications. With 4-lane HBR2 (High-Bit-Rate 2) configuration, the DP receiver can support VESA resolution up to WUXGA (1920 x 1200@120 Hz) or WQXGA (2560 x 1600 RB@120 Hz) or support CEA resolution up to 1080P@120 Hz or 4K x 2K@60 Hz. |
| IT6251FN | LVDS to DisplayPort 1.1a Transmitter The IT6251 is a high-performance single-chip De-SSC LVDS to DisplayPort converter. Combined with LVDS receiver and DisplayPort Transmitter, the IT6251 supports LVDS input and DisplayPort 1.1a output by conversion function. The build-in LVDS receiver can support single-link and dual-link LVDS inputs, and the build-in DisplayPort transmitter is fully compliant with DisplayPort 1.1a specification. With high speed LVDS RX, the IT6251 can support resolution up to 1080P and UXGA and 10-bit deep colors. In order to reduce the EMI noise on legacy system application, the traditional LVDS source will transmit differential signals with spread spectrum, but this spread spectrum does not be allowed for DisplayPort protocol. The IT6251 also build-in unique De-SSC ( De-Spread Spectrum ) function , it can help customers easily to adopt the IT6251 on the EMI-concerned platform, with SSC has been generated from LVDS source processors. |
| IT68352 | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 and HD 2.0 to HD 2.0 Converter The IT68352 is a highly integrated USB type-C/PD controller with DisplayPort and HD 2.0 to HD 2.0 converter. The IT68352 has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support. For the USB PD application, IT68352 supports PD 2.0 completely, and PD 3.0 with the chunk mode completely. |
| IT68353 | Dual Port 4 Lane DP 1.4 and HD 2.0 to HD 2.0 Converter with one portUSB-C (DP Alt Mode) & PD Controller The IT68353 is a highly integrated one port USB type-C/PD controller with dual port DisplayPort and single port HD 2.0 to HD 2.0 converter. Only one of the DisplayPort ports can be configured as USB-C. The IT68353 has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support. |
MIPI
| 型号 | 功能描述 |
|---|---|
| IT6122 | MIPI to LVDS Converter The IT6122 is a high-performance and low-power MIPI to LVDS converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and LVDS specifications. The IT6122 supports four lanes MIPI RX and 2-Link LVDS TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and the LVDS TX supports as high as 1.05Gbps per channel. |
| IT6113 | High Speed MIPI DSI 4 Lane to 8 Lane Bridge The IT6113 MIPI DSI video bridge is a 4-lane-in, 8-lane-out high speed data converter/splitter. It integrates a 4-lane single–link MIPI DSI receiver and an 8-lane dual-link MIPI DSI transmitter. The DSI bridge may be configured to a half-rate data converter or a full-rate data splitter for different applications. |
| IT6510 | 4 Lanes DisplayPort 1.2 to 4 Lane MIPI-CSI/DSI Converter The IT6510 is a high-performance single-chip DisplayPort to MIPI-CSI/DSI converter. Combined with DisplayPort receiver, MIPI transmitter, the IT6510 support DisplayPort input and MIPI-CSI/DSI output by conversion function. |
| IT6520 | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to MIPI Converter The IT6520FN is a highly integrated USB type-C/PD controller with DisplayPort to MIPI converter. It is suitable for dongle application. The IT6520FN has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support. |
| IT6616 | HD 1.4 to MIPI CSI/DSI Converter IT6616 is a high performance HD-to-MIPI video converter. It integrates an HD 1.4 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI D-PHY. For AR/VR, mobile or other display applications that require to translating HD protocol to MIPI CSI/DSI output, the IT6616 is an optimized low power and high quality solution. |
| IT6625 | HD 2.0 to Dual Port MIPI CSI/DSI Converter The IT6625 is a high performance HD-to-MIPI video converter. It integrates an HD 2.0 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HD protocol to the MIPI output, the IT6625 is an optimized low power and high quality solution. |
| IT6626 | HD 2.1 to Dual Port MIPI CSI/DSI Converter The IT6626 is a high performance HD-to-MIPI video converter. It integrates an HD 2.1 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HD protocol to the MIPI output, the IT6626 is an optimized low power and high quality solution. |
| IT6162 | Dual port MIPI to HD 2.0 Converter with Embedded MCU The IT6162 is a high-performance and low-power dual-port MIPI DSI to HD 2.0 converter. It receives one or dual port MIPI DPHY input with low-quality MIPI cables, and converts it to TMDS output, of which current levels and pre-emphasis are both programmable. |
| IT6152 | Dual-port MIPI to DisplayPort 1.4 Converter with Embedded MCU The IT6152 is a high-performance and low-power dual-port MIPI to DisplayPort converter. With two MIPI receivers and one DisplayPort transmitter, the IT6152 converts dual or single port MIPI input to single DisplayPort output. |
USB-C Bridge
| 型号 | 功能描述 |
|---|---|
| IT6225B | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 2 Lane DP 1.4 to HD 2.0 Converter The IT6225B is a highly integrated USB type-C/PD controller with DisplayPort to HD converter. It is suitable for dongle applications. |
| IT6224B | USB Type-C & Power Delivery Controller Built-in 4 Lane DisplayPort to HD/VGA Converter The IT6224B is a highly integrated USB type-C/PD controller with DisplayPort to HD or VGA converter. It is suitable for dongle applications. |
| IT6227 | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to HD 2.1 Converter The IT6227FN is a highly integrated USB type-C/PD controller with DisplayPort to HD converter. It is suitable for dongle application. |
USB3 Video Bridge
| 型号 | 功能描述 |
|---|---|
| IT9339 | HD 2.0 Video to USB Converter with HD 2.0 Loop-Through Output IT9339G is a video bridge IC that convert digital video and audio input to the USB packet output. The packaging for IT9339G is thin-profile fine-pitch ball grid array (TFBGA) with 223 balls. The IT9339G input interface is an HD 2.0 and HDCP 2.3 compliant interface that supports a signaling rate up to 6.0 Gbps per channel. |
| IT9330 | 4K60 Digital Video to USB3 Converter with UVC MJPEG Support IT9330 is a series of bridge ICs that convert digital video and audio input to the USB packet output. The series includes IT9333TE, IT9333TE-I, IT9335TE, IT9335TE-I, and IT9337G. |
| IT9320 | Digital Video to USB3 Converter IT9320 is a series of bridge ICs that convert digital video and audio input to the USB packet output. The series includes IT9323TE, IT9325TE, and IT9327G. The packaging for IT9323TE and IT9325TE is thin quad flat pack (TQFP) with 144 pins and exposed E-pad, while that for IT9327G is thin-profile fine-pitch ball grid array (TFBGA) with 196 balls. |
USB Type C
USB Type C Product Line
| 型号 | 功能描述 |
|---|---|
| IT5225 | Type C DFP controller with 15W power switch for USB 3.2 gen 2x2 IT5225FN is a USB Type C DFP (Downstream Facing Port) controller and 5V power switch for VBUS and VCONN power. |
| IT5205 | USB Type-C 3:2 Alt. mode passive MUX IT5205 is a Type-C 3:2 alternate mode MUX including one USB 3.1 Gen-2 channel up to 10 Gbps and 4 lanes of DP 1.4 up to 8.1 Gbps. |
| IT885x | USB Type-C PD 3.0 controller IT885x products are USB PD 3.0 controller *1 or 2 ports or with Alt. mode MUX. |
| IT521x | USB Type-C PD 3.0 with Billboard device controller IT521x products are USB PD 3.0 controller * 1 or 2 ports with Billboard device controller. |
| IT5201 | CC+ USB 3.1 Gen-2/10Gbps 2:1 Passive MUX IT5201 is a USB 3.1 Gen-2/10Gbps 2:1 MUX with Type-C controller for DFP/UFP/DRP application. |
USB-C Bridge
| 型号 | 功能描述 |
|---|---|
| IT6225B | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 2 Lane DP 1.4 to HD 2.0 Converter The IT6225B is a highly integrated USB type-C/PD controller with DisplayPort to HD converter. It is suitable for dongle applications. |
| IT6224B | USB Type-C & Power Delivery Controller Built-in 4 Lane DisplayPort to HD/VGA Converter The IT6224B is a highly integrated USB type-C/PD controller with DisplayPort to HD or VGA converter. It is suitable for dongle applications. |
| IT6227 | USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to HD 2.1 Converter The IT6227FN is a highly integrated USB type-C/PD controller with DisplayPort to HD converter. It is suitable for dongle application. |
SoC
| 型号 | 功能描述 |
|---|---|
| IT986x | SoC with 1080P H.264 Decoder IT986x SoC series is equipped with dual ARM9 CPUs which can operate at up to 800MHz. It has a powerful 2D graphics engine that supports up to 1080p video, allowing for the implementation of a GUI that is both vivid and responsive. As for the panel resolution, it can display up to 2160*1080 pixels. MIPI, RGB, LVDS and other panel interfaces are also supported. It is embedded with up to 1Gb DDR3 memory, with various peripheral interfaces reserved, giving designers great expandability. Support FreeRTOS within the comprehensive ITE SoC SDK. |
| IT983x | SoC for Low to Mid-end HMI Application IT983x SoC series is equipped with dual RISC-V CPUs which can operate at up to 500MHz. It has a powerful 2D graphics engine, allowing for the implementation of a GUI that is both vivid and responsive. As for the panel resolution, it can display up to 1280*800 pixels. MIPI, RGB, LVDS and other panel interfaces are also supported. It is embedded with up to 512Mb DDR2 memory, with various peripheral interfaces reserved, giving designers great expandability. Support FreeRTOS within the comprehensive ITE SoC SDK. |
| IT97x | SoC with 1080P H.264 Decoder IT97x SoC series is equipped with ARM9 CPU which can operate at up to 800MHz. This device features a powerful H.264 Video codec that can handle video up to 1080p, as well as a 2D graphic engine that enables the creation of a vivid and responsive graphical user interface (GUI). It also supports a variety of panel interfaces, including MIPI, RGB, and LVDS. With up to 1Gb DDR3 memory and multiple peripheral interfaces available, designers have ample room for expansion. Additionally, the comprehensive ITE SoC SDK includes support for FreeRTOS. |